I need to take off the hose, that runs to my water pump, and my radiator, but im having a diffecult time because i can't get the clamps off
How do you change the hoses one a 96 mercury Mystque?
Which engine, the 2.0L DOHC 4-cyl. or the 2.5L V6? The one on the 4-cyl. is not easy to access where it attaches to the water pump. You need a special rad hose squeeze type clamp tool to remove the clamp, which I would replace with a conventional worm type clamp when replacing the hose. Hope this helps.
How do you change the hoses one a 96 mercury Mystque?
Open the clamps with big pliers and work the hose off.
use some of the red lube that comes in the big *** tub... and put it on the end of a flat tip screwdriver, make sure you use a lot of lube. Then shove it between the hose and the connection of the radiator end of the hose and pry up.
